|
|
|
|
||||||||||||||||
|
DESCRIPTION: The Model SC SCR Controller is a low-cost variable speed DC motor drive providing 0-90 volt variable voltage output from a single phase, 115 volt AC input. This controller has been specifically designed to power various RAE permanent magnet DC motors. Industrial grade components are used throughout, providing very reliable service. FEATURES: Low Cost | On-Board Speet Pot | Single Phase
Input with Full Wave Rectified Output | Adjustable Min/Max
Speed
Pots |
Transient and Surge Voltage Protection | Optional Integral
On/Off Switch |
Optional Improved Line Voltage Compensation to 2% of Set Speed |
Optional Knob and Speed Dial | Optional Remote Potentiometer |
|
115 VOLT AC INPUT 0-90 VOLT DC OUTPUT 10% ± AC LINE VOLTAGE VARIATION 60 HZ ± 2 HZ AC LINE FREQUENCY |
MAX. CURRENT RATING TO 5 AMPS MAX. LOAD TO 150% FOR 1 MINUTE 10% ± LINE COMPENSATION SPEED REGULATION OF 15% OF BASE SPEED |
20 TO 1 SPEED RANGE 50 TO 100% MAXIMUM SPEED 1 TO 50% MINIMUM SPEED 1.4 FORM FACTOR |
To
Download
Drawings Click Preferred Format
.DXF (.Zip) .Dwg
Modifications to the performance and/or the physical configuration of this Series may be possible in order to accommodate unique customer specifications. For Ordering Information, visit our ORDER PAGE. For additional information or assistance, please contact the factory.
RAE Corporation
4615 W. Prime Parkway
McHenry, IL 60050-7037
Phone:
815-385-3500
Toll Free
800-323-7049
In Illinois
800-892-2805
Fax:
815-363-1641
E-Mail:
